1/4″ to XLR Cable – 1′
A short, sturdy patch cable that bridges a 1/4″ output to an XLR input.
Showing all 20 results
Power & CablingA short, sturdy patch cable that bridges a 1/4″ output to an XLR input.
Power & CablingA simple three-way adapter that turns one outlet into three. Handy when a speaker, a mixer, and a light all need the same outlet and there’s no room for a full power strip. Note that it’s a splitter, not a surge protector – if you’re powering sensitive gear, the surge-protected strip is the safer choice.
Power & CablingThe go-to cable for feeding a phone or laptop into a mixer’s left and right inputs.
Power & CablingA surge-protected power strip that safely runs and shields your gear from one outlet.
Power & CablingA professional 3-foot Canare 12G-SDI patch cable – the short jumper that connects a converter to a switcher or a monitor to a distribution amp without a coil of excess cable on the floor. Same broadcast-grade construction as our longer runs, just sized for gear that sits together.
Power & CablingA professional 50-foot Canare 12G-SDI video cable – the broadcast standard for carrying video over long runs without the signal degradation HDMI suffers past about 25 feet. The 12G rating handles full 4K, and Canare’s solid copper conductor with 91% braid shielding is what rental and broadcast houses specify when a dropout isn’t an option. This is what you use when the camera or source is far from the screen. Pair it with our SDI converters if the gear on either end uses HDMI.
Power & CablingThe EcoFlow Delta Pro is a large, silent battery power station – it delivers standard wall-outlet power with no generator noise or fumes, making it the answer for events where there’s no outlet nearby. A single charge runs a full PA and lighting rig for most events.
Power & CablingA high-speed 10-foot HDMI cable – the standard connection for sending video and audio from a laptop, Blu-ray player, or streaming box to a projector or screen.
Power & CablingA 12-gauge 100′ extension cord to get power to your gear.
Power & CablingA 16-gauge 15′ extension cord to get power to your gear.
Power & CablingA 14-gauge 25′ extension cord to get power to your gear.
Power & CablingA 14-gauge 50′ extension cord to get power to your gear.
Power & CablingA 16-gauge 8′ extension cord to get power to your gear.
Power & CablingA pro-grade 100′ XLR cable for clean, quiet signal on the longest runs – large venues and outdoor events.
Power & CablingA pro-grade 15′ XLR cable for clean, quiet signal on short runs – a podium mic or a speaker a few steps away.
Power & CablingA pro-grade 25′ XLR cable for clean, quiet signal across a typical room. The most commonly rented XLR cable we offer.
Power & CablingA pro-grade 3′ XLR cable for clean, quiet signal for patch cable runs. Most commonly used with wireless microphone system rentals.
Power & CablingA pro-grade 50′ XLR cable for clean, quiet signal on long runs across a hall. The second most commonly rented XLR cable we offer.
Power & CablingA pro-grade 6′ XLR cable for clean, quiet signal between gear sitting side by side.
Power & CablingAn XLR-to-3.5mm adapter cable bridges a phone or laptop’s headphone jack directly to an XLR input on a speaker or mixer, so a personal device can feed a simple PA system without a separate box.